Search the calendar
 
 
   ARCHIVE: 2007/08 Academic Calendar
 
 HOME
 
 
 

Trades and Technology
www.ufv.ca/trades

Auto Service Technician certificate

Entry-level trades training

At UCFV, we put students on the road towards a career as an automotive technician. The Auto Service Technician program will prepare students for entry into the automotive service and repair industry. Successful completion may also provide students with advanced placement in the Auto Service Technician Apprenticeship program. Students will get a thorough introduction to the trade and develop skills expected by employers. Students will have the opportunity to acquire a general knowledge on most systems used on cars and light trucks.

Theory and shop procedures are set up to simulate job conditions, so punctuality and good work habits are essential. This program exceeds the provincial standards of Foundation and ELTT programs taught throughout B.C.

Career Technical Centre

UCFV and School District #34 (Abbotsford) operate a jointly sponsored Career Technical Centre. Auto Service Technician students enter at the Grade 11 level and complete high school and a one-year UCFV Auto Technician certificate over two years. For more information, call 604-850-8672 or visit www.careertechcentre.com.

Employment opportunities

After successfully completing the program, students will be prepared for employment opportunities in automotive dealerships, repair shops, repair shops involved in fleet maintenance, and shops that specialize in exhaust, brakes, transmissions, and tune-ups.

Entrance requirements

1. B.C. secondary school graduation or equivalent.

2. A math and reading comprehension entrance exam.

How to apply

1. Submit a UCFV application form, along with the $45 application fee, to the Admissions & Records office. Applicants currently in Grade 12 may apply during their Grade 12 year. A statement from the school counsellor or principal, indicating that you are likely to meet graduation requirements by June, must be presented at the time of entrance exam appointment.

2. Applicants will be notified of entrance exam dates by the Trades & Technology Centre. There is no fee for writing these exams. Applicants who have not been contacted within two weeks of submission of their applications should call 604-854-4548.

3. Read the program description and information carefully. If you wish to contact the instructor, call Vern Wright at 604-504-7441, local 4340 or email vern.wright@ufv.ca.

4. Prior to classes starting in September, applicants will be notified by telephone of the registration procedures. Applicants who cannot be reached by telephone after three attempts will be removed from the wait list.

Basis for admission decision

Applicants who meet the entrance requirements will be admitted in order of their application date. This date is set when an application, all required documentation, and the application fee have been submitted.

Fees and other expenses

See the Fees and Other Costs section. Automotive Technician students should also budget approximately $625 for basic hand tools, $625 for required textbooks, and $250 for appropriate working apparel.

Note: A deposit (currently $200) must be paid at the time of registration, which typically takes place one or two months before the start of each semester. The balance of fees must be paid by the second week of the semester.

Medical requirement

A medical statement from a qualified physician may be required at any time before or during the program. Students will be notified by a UCFV official if/when the statement is required.

Location

The Automotive Service Technician program is offered at the Trades & Technology Centre at the Canada Education Park in Chilliwack, which is open 8 a.m.–3:30 p.m., Monday to Friday. Classes and shops are in session from 8 a.m.–2 p.m., Monday to Friday.

Dates & attendance requirements

The Automotive program starts in September and ends the following May.

The Automotive program requires continuous attendance through all three semesters to successfully complete all requirements for the program. Students will be expected to attend classes five days per week for the duration of the entire program.

Students who fail to meet the attendance requirements as outlined in their individual program guides may be subject to a failing grade or academic warning.

• See UCFV Policy 340.03 (Academic Warning).
• See UCFV Policy 310.03 (Attendance).

Program requirements

Students must complete all requirements with a minimum of 70% or better to receive a Credit (CR) grade in order to graduate.

Students who do not receive a Credit (CR) grade in all required areas by the program end date, may apply to their instructor for re-entry into the program. Students who reapply may register as upgrading students and must complete all program requirements no later than the program end date of the following year. See upgrading policy for more details.

Graduation

Students must apply for graduation by completing a Request to Graduate form available at the Trades Centre. We recommend this be done at the beginning of your final semester.

Academic warnings

Trades & Technology students who demonstrate unacceptable academic performance will be placed on Academic Warning.
• See UCFV Policy 340.03 (Academic Warning).

Unacceptable academic performance may, at the discretion of the instructor, include poor attendance, slow progress in theory and practical tasks, and/or lack of satisfactory participation in class activities.
• See UCFV Policy 310.02 (Attendance).

Trades & Technology students are expected to conduct themselves in a mature and responsible manner, and will be held responsible for their actions, whether acting alone or in group.
• See UCFV Policy 310.12 (Student Conduct).

Withdrawal policy

Student-initiated withdrawal (discontinuing)

If a student wishes not to continue or return for the next semester, the Trades Centre will advise Admissions & Records and initiate a withdrawal from the student’s current Trades program.

Required to withdraw (failed grades)

Failed grades may result in withdrawal from the program.

Required to withdraw (academic warning)

Students may be required to withdraw from a course or program for failing to comply with any of the following three policies.

• UCFV Policy 340.03 (Academic Warning)
• UCFV Policy 310.02 (Attendance)
• UCFV Policy 310.12 (Student Conduct).

Upgrading policy

An upgrading student will be enrolled for no more than 13 weeks. Upgrading students will not displace anyone registered in the next intake.

The upgrading program allows those currently or recently employed in the industry to complete their certificate requirements or to become proficient in specific processes or techniques.

Upgrading students are expected to meet program prerequisites through previous enrolment or proof of industry experience approved by the program instructor.

Re-admission policy

Students who begin a trades program, but withdraw before completing the program, may contact the department to request re-entry to the program provided their absence is less than two years. Re-entry is subject to space availability.

If you are absent more than two years you will be required to apply for re-admission.

• An Application for admission form and Application fee will be required
• Trades & Technology entrance exams will need to be retaken

Program outline

The Automotive program starts in September and ends about the end of May.

Students must show that they understand the theory by successfully completing a written test for each unit.

They must then apply their knowledge to demonstrate an acceptable level of practical skills as assigned in that unit.

The learning materials may include printed handouts, worksheets, videotapes, display boards, lab manuals, and written instructions.

At regular stages students will be required to move to a shop or lab area to perform various tasks in order to develop their practical skills.

As much as possible, study lab and shop instruction is patterned after “on-the-job” situations where a limited amount of direct supervision is required.

The training follows a modular system that begins by developing a wide variety of basic skills, and builds on these to develop intermediate and specialized skills required in this industry.

Sample topics:

• Safe and effective work practices
• Using specialized equipment
• Servicing steering and suspension systems
• Servicing brake systems
• Performing major engine service and repair
• Servicing engine support systems
• Servicing electrical systems
• Technical Communications 115 (three academic credits).

All unit tests and assigned practicals must be completed with a passing grade before writing the final exam, which is scheduled in May.

Apprenticeship

The Automotive Apprenticeship program is designed for people already working in the Automotive Repair Industry and registered with the Industry Training Authority (ITA). UCFV offers all four levels of technical training. These six week sessions are necessary to achieve journeyperson certification along with the appropriate on-the-job training. For information call 604-854-4506 or email apprenticeship@ufv.ca.


Calendar Home | Program Index | Course Descriptions | Schedule of Events | UCFV Home | UCFV A-Z | Apply Now | Contact Us 

Copyright © University College of the Fraser Valley (UCFV), 33844 King Road, Abbotsford, BC, Canada, V2S 7M8