Academic Calendar Winter/Summer 2017

Engineering


English Language Requirements

Students registering in post-secondary level courses (numbered 100 to 499) will be required to meet the English language entrance proficiency requirements. Students in ESL or the University Foundations programs can register in those courses identified in the University Foundations program with lower levels of language proficiency.

ENGR 100

1 credit

Production in Practice

Prerequisite(s): Enrolled in the Engineering Physics diploma in Mechatronics program.

This course gives students rudimentary hands-on experience in several industrial practices associated with welding, electrical systems, construction, and automotive work.

ENGR 113

4 credits

Engineering Physics - Statics & Dynamics

Prerequisite(s): PHYS 111; MATH 111

This course is specifically designed for students who wish to pursue a career in engineering. The emphasis of this course will be on solving realistic problems. In place of the normal laboratory period, a weekly problem-solving and tutorial period is used to sharpen problem-solving skills. Topics include Newton's laws, kinematics, statics, and dynamics for particles and systems of particles, static and rotational equilibrium, analysis of structures, planar motion of rigid bodies, energy and momentum conservation.

ENGR 122

1 credit

Introduction to Engineering

Pre- or corequisite(s): PHYS 111

This course exposes students to a wide range of engineering practices, with a view to helping them identify their specific interests. The course meets once a week for between one and four hours. Some weeks there will be an engineer on campus to give a presentation of their work. Other weeks the students will visit a site where engineering skills are being applied.

ENGR 151

4 credits

Computer-Aided Engineering Graphics

(formerly PHYS 151)

Prerequisite(s): Familiarity with Windows-based systems

Pre- or corequisite(s): PHYS 111

This course covers technical sketching, orthographic projection, visualization in three dimensions and conventions of engineering drawing. Computer-based graphics (CADD) will be introduced. The principles of descriptive geometry will be applied to the solution of space problems. This course is designed for students intending to transfer to Engineering at UBC or UVIC and emphasizes engineering practices.

ENGR 152

4 credits

Linear Algebra for Engineering

Pre- or corequisite(s): MATH 112

This course covers the solutions to linear systems of equations, vector spaces, applications to 2D and 3D geometry, linear dependence and independence, matrix algebra, determinants, orthogonal transformations and bases, application to Fourier series, eigenvalues, diagonalization, symmetric matrices, the algebra of complex numbers, the differential equations of vibrational models and linear systems of differential equations. This course is designed for students seeking a career in engineering; students intending on a BSc or BA degree are recommended to take MATH 221 instead of ENGR/MATH 152.
Note: UFV math degrees require MATH 221, not MATH 152. Credit cannot be obtained for both MATH 152 and ENGR 152.

ENGR 210

3 credits

Circuit Analysis

Prerequisite(s): PHYS 112

Pre- or corequisite(s): PHYS 381

This course is an introduction to circuit analysis, a mathematical model used to represent a variety of engineering problems such as electric circuits. In particular, students will learn about phasor analysis and AC power; transfer functions; Bode plots; filters and resonance; transformers, and two-port networks.

ENGR 255

3 credits

Ordinary Differential Equations

Prerequisite(s): MATH 112 or at least a B in Math 118

Pre- or corequisite(s): MATH 211 and one of the following: MATH 152, MATH 221, or PHYS 221.

This course provides theory and techniques needed to solve ordinary differential equations, with an emphasis on applications. Topics include first- and second-order linear differential equations, nonlinear equations, series solutions, Laplace transform methods, and linear systems of differential equations.

Note: This course is offered as MATH 255 and ENGR 255. Students may take only one of these for credit.

ENGR 257

3 credits

Mathematical Physics

Prerequisite(s): MATH 211 and (one of the following: PHYS 221 or MATH 255) and (one of the following: PHYS 112 or any other MATH course 200-level or above).

Partial and ordinary differential equations. Fourier series/transforms. Legendre polynomials. Laplace transforms. Applications to heat flow and waves. Laplace's equation in 1D, 2D, 3D using Cartesian, polar, and spherical co-ordinates. Special functions including Dirac Delta, Heaviside Theta, Si, Ci, Ei, Erf, Gamma.

Note: This course is offered as PHYS 381, MATH 381, and ENGR 257. Students may take only one of these for credit.

ENGR 330

4 credits

Automatic Control Systems

Prerequisite(s): ENGR 210

This course is an introductory course on automatic control. The main goal of the course is to provide students with basic tools in modeling, analysis, and design for linear feedback control systems. Students will learn how to model mechanical, electrical, and electromechanical systems as differential equations and transfer functions. The analyses in this course include stability of open-loop and closed-loop systems as well as time responses and frequency responses of low order systems. The design methods are divided into root-locus techniques and frequency response techniques using Bode plots for designing proportional-integral-derivative (PID) and lead/lag controllers. Students will also learn how to apply automatic control theory to real engineering problems with Matlab and through laboratory exercises. This course will give the basic knowledge for more advanced control courses, such as state-space control techniques, nonlinear control, robust control, optimal control, adaptive control, digital control, sampled-data control, hybrid control, and system identification.

ENGR 340

4 credits

Micro-Processors and Embedded Systems

Prerequisite(s): ENPH 320, ENPH 310, COMP 150, or COMP 152

This course covers basic microcomputer architecture; design and analysis of address decoders and memory systems; design and analysis of assembly language programs; and microcomputer system design.

ENGR 350

4 credits

Sensors and Actuators

Prerequisite(s): ENGR 330

This course provides an introduction to sensors and actuators for electromechanical, computer-controlled machines, and devices. Topics include operating principles, design considerations, and applications of analog sensors, digital transducers, stepper motors, continuous-drive actuators, and drive system electronics. Component integration and design considerations are studied through examples selected from applications of machine tools, mechatronics, precision machines, robotics, aerospace systems, and ground and underwater vehicles. Laboratory exercises strengthen the understanding of component performance, system design, and integration.

ENGR 390

3 credits

Mechatronics

Prerequisite(s): ENPH 320, ENGR 330, PHYS 392 or ENPH 360

This is the capstone course of the Engineering Physics diploma in Mechatronics. Students will apply the knowledge gained in prior courses to specific projects. Typically, students will complete several projects. Students will function as if they are in the industry, with many interim reports given to the instructor as projects progress. Students will deliver oral presentations on their projects to the class, and will be graded on the quality of their presentation as well as the quality of their project and their written report.
The students will assemble the robots and program them using feedback control strategies to make them fulfill tasks such as obstacle avoidance, trajectory planning, and material pick up

Last extracted: November 04, 2016 02:22:49 PM

Current Students

s